Notifica
Stai navigando sul sito per i clienti provenienti da Città del Vaticano. Ti consigliamo di passare alla versione Stati Uniti del sito, ottimizzata per la tua regione.
|
Produttore
FTDI
|
FT2232H | USB Bridge | USB 2.0 Device 480 Mbit/s | JTAG x2, 232 UART (Full) / 422 UART / 485 UART x2, 245 FIFO x2, Async or Sync Bit Bang x2, CPU FIFO x2, I2C Master x2, SPI Master x2 | Interface for Microwire EEPROM | 3...3,6 V | SMD | 64-LQFP | MSL 3 | - |
|
Produttore
FTDI
|
FT2232 | USB Bridge | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x2, 245 FIFO x2, Async or Sync Bit Bang x2, CPU FIFO x2, I2C Master, JTAG, SPI master | Interface for Microwire EEPROM | 4,35...5,25 V | SMD | 48-LQFP | MSL 3 | - |
|
Produttore
FTDI
|
FT2233HPQ | USB Bridge with Type-C/PD3.0 Controller, Dual PD Ports | USB 2.0 Device 480 Mbit/s | JTAG x2, 232 UART (Full) / 422 UART / 485 UART x2, 245 FIFO x2, Async or Sync Bit Bang x2, CPU FIFO x2, I2C Master x2, SPI Master x2 | Interface for Microwire EEPROM | 3...3,6 V | SMD | 76-QFN | MSL 3 | - |
|
Produttore
FTDI
|
FT-X | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART | 4 configurable GPIO, Battery Charger Detection, config. EEPROM | 3…5,5 V | SMD | 16-QFN | MSL 3 | - |
|
Produttore
FTDI
|
FT-X | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART | 4 configurable GPIO, Battery Charger Detection, config. EEPROM | 3…5,5 V | SMD | 16-SSOP | MSL 3 | - |
|
Produttore
FTDI
|
FT-X | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (Full) / 422 UART / 485 UART | 4 configurable GPIO, Battery Charger Detection, config. EEPROM | 3…5,5 V | SMD | 20-QFN | MSL 3 | - |
|
Produttore
FTDI
|
FT-X | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (Full) / 422 UART / 485 UART | 4 configurable GPIO, Battery Charger Detection, config. EEPROM | 3…5,5 V | SMD | 20-SSOP | MSL 3 | - |
|
Produttore
FTDI
|
FT232B | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (Full) / 422 UART / 485 UART | Battery Charger Detection, config. EEPROM | 4,35...5,25 V | SMD | 32-LQFP | MSL 3 | - |
|
Produttore
FTDI
|
FT232H | USB Bridge | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART, 245 FIFO, Async or Sync Bit Bang , CPU FIFO, I2C Master, JTAG, SPI Master | Interface for Microwire EEPROM | 3...3,6 V | SMD | 48-LQFP | MSL 3 | - |
|
Produttore
FTDI
|
FT232H | USB Bridge | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART, 245 FIFO, Async or Sync Bit Bang , CPU FIFO, I2C Master, JTAG, SPI Master | Interface for Microwire EEPROM | 3...3,6 V | SMD | 48-LQFP | MSL 3 | - |
|
Produttore
FTDI
|
FT232HPQ | USB Bridge with Type-C/PD3.0 Controller, Single PD Port | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART, 245 FIFO, Async or Sync Bit Bang , CPU FIFO, I2C Master, JTAG, SPI Master | Interface for Microwire EEPROM | 3...3,6 V | SMD | 56-QFN | MSL 3 | - |
|
Produttore
FTDI
|
FT232RN | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (Full) / 422 UART / 485 UART | Config. EEPROM | 3,3...5,25 V | SMD | 28-SSOP | MSL 3 | - |
|
Produttore
FTDI
|
FT232RN | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (Full) / 422 UART / 485 UART | Config. EEPROM | 3,3...5,25 V | SMD | 32-QFN | MSL 3 | - |
|
Produttore
FTDI
|
FT-X | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART | 1 Configurable GPIO, Battery Charger Detection, config. EEPROM | 3…5,5 V | SMD | 10-DFN | MSL 3 | - |
|
Produttore
FTDI
|
FT-X | USB Bridge | USB 2.0 Device 12 Mbit/s | 8-bit FIFO | 2 Configurable GPIO, Battery Charger Detection, config. EEPROM | 3…5,5 V | SMD | 24-SSOP | MSL 3 | - |
|
Produttore
FTDI
|
FT245B | USB Bridge | USB 2.0 Device 12 Mbit/s | 8-bit FIFO | Interface for Microwire EEPROM | 4,35...5,25 V | SMD | 32-LQFP | MSL 3 | - |
|
Produttore
FTDI
|
FT245RN | USB Bridge | USB 2.0 Device 12 Mbit/s | 8-bit FIFO | Config. EEPROM | 3,3...5,25 V | SMD | 28-SSOP | MSL 3 | - |
|
Produttore
FTDI
|
FT260 | USB HID Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (Full) / 422 UART / 485 UART, I2C Master | 12 Configurable GPIO, eFUSE config, supports I2C EEPROM | 3…5,5 V | SMD | 28-QFN | MSL 3 | - |
|
Produttore
FTDI
|
FT4232 | USB Bridge | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x4, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 56-QFN | MSL 3 | - |
|
Produttore
FTDI
|
FT4232 | USB Bridge | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x4, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 64-LQFP | MSL 3 | - |
|
Produttore
FTDI
|
FT4233HPQ | USB Bridge with Type-C/PD3.0 Controller, Dual PD Port | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x2, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 76-QFN | MSL 3 | - |
|
Produttore
FTDI
|
FT6xx | USB Bridge | USB 3.0 5 Gbit/s | FIFO 16-bit | n/a | 3...3,6 V | SMD | 56-QFN | MSL 3 | - |
|
Produttore
FTDI
|
VNC1 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (Full) / 422 UART / 485 UART, FIFO, SPI Slave | 28 GPIO | 3...3,6 V | SMD | 48-LQFP | MSL 3 | - |
|
Produttore
FTDI
|
VNC2 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (RTS, CTS) / 422 UART / 485 UART, SPI Slave | 3 GPIO | 3...3,6 V | SMD | 32-LQFP | MSL 3 | - |
|
Produttore
FTDI
|
VNC2 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (Full)c / 422 UART / 485 UART, SPI Master, SPI Slave | 3 GPIO | 3...3,6 V | SMD | 48-LQFP | MSL 3 | - |
