Fabricant
FIGARO
|
KE-LF | Sensor | Electrochemical | Oxygen (O2) | 0...100% | - | Voltage | 0,3125 mV/% O2, typ. | ±1% FS *1 | - | - mA | +5...+40°C | D23 x 50 mm | Free wires | Lead-Free, Response time (90%): approx 15 sec. | - | - | *1: When calibrated at both 0% and 100% O2 |
Fabricant
FIGARO
|
KE-LF | Sensor | Electrochemical | Oxygen (O2) | 0...30% | - | Voltage | 0,6 mV/% O2, typ. | ±1% FS *1 | - | - mA | +5...+40°C | D23 x 50 mm | Free wires | Lead-Free, Response time (90%): approx 15 sec. | - | - | *1: When calibrated at both 0% and 30% O2 |
Fabricant
FIGARO
|
KE-LF | Sensor | Electrochemical | Oxygen (O2) | 0...30% | - | Voltage | 0,6 mV/% O2, typ. | ±1% FS *1 | - | - mA | +5...+40°C | D28 x 47,3 mm | Free wires | Lead-Free, Response time (90%): approx 15 sec. | - | - | *1: When calibrated at both 0% and 30% O2 |
Fabricant
FIGARO
|
- | Module | NDIR | Carbon dioxide (CO2) | 360...5 000ppm | 1 000ppm, user changable | I2C/UART, PWM | - | ±{50ppm + 3% m.v.) *1 | 3,3 ± 0,3V or 5 ± 0,5V | 25mA avg. @ 5V mA | 0...+50°C | 32 x 17 x 8mm | PCB Pins | Dual wavelength system | - | CMOS Output | *1: long term accuracy not included |
Fabricant
FIGARO
|
- | Sensor | MOS | Air contaminants | 1...100ppm | - | ΔR | 0,3-0,6 | - | - | - mA | -10...+50°C | D17,8x9,2mm | Solid legs | - | - | - | - |
Fabricant
FIGARO
|
- | Sensor | MOS | Methane (CH4) | 300...10 000ppm | - | ΔR | 0,52-0,65 | - | - | - mA | -40...+70°C | D22,4x9,2mm | Solid legs | - | - | - | - |
Fabricant
FIGARO
|
- | Sensor | Electrochemical | Carbon monoxide (CO) | 0...10 000ppm | - | Current | - | - | - | - mA | 0...+50°C | D49x20,9mm | - | Battery operable electrochemical sensor | - | - | - |
Fabricant
FIGARO
|
- | Sensor | Electrochemical | Carbon monoxide (CO) | 0...5 000ppm | - | Current | - | - | - | - mA | -10...+50°C | D10,8x13,9mm | Solid legs | Battery operable electrochemical sensor | - | - | - |
Fabricant
FIGARO
|
- | Sensor | MOS | Air contaminants | 1...100ppm | - | ΔR | - | - | - | - mA | -10...+50°C | 3,2x2,5x0,99mm | SMD | - | - | - | - |
Fabricant
FIGARO
|
- | Sensor | MOS | Combustible gases (Methane, Propane, Iso-butane) | 500...10 000ppm | - | ΔR | - | - | - | - mA | -40...+70°C | D16,5x17mm | Solid legs | - | - | - | - |
Fabricant
FIGARO
|
- | Sensor | MOS | Organic solvent vapors, ethanol | 50...5 000ppm | - | ΔR | - | - | - | - mA | -10...+40°C | D16,5x17mm | Solid legs | - | - | - | - |
Fabricant
FIGARO
|
FECS41 | Sensor | Electrochemical | Nitrogen monoxide (NO) | 0...300ppm | - | Current | 400 ± 80 nA/ppm | - | - | - mA | -20...+50°C | 20,4x16,5mm | Pins for socket | - | - | - | - |
Fabricant
FIGARO
|
- | Module | Catalytic | Hydrogen (H2), Methane (CH4), Butane, Propane | H2: 0...14 000ppm | - | Voltage, 1...4,5V | - | - | 5V | 300 mA | -10...+60°C | 50x30x25,3mm | Connector | TGS6812 sensor | - | - | - |
Fabricant
FIGARO
|
- | Accessory | - | - | - | - | - | - | - | 100-240V | - mA | 0...+50°C | 340x270x202mm | Connector on cable | - | - | - | Test board for gas sensor evaluation modules |
Fabricant
FIGARO
|
FECS40 | Sensor | Electrochemical | Carbon monoxide (CO) | 0...1000ppm | - | Current | 70 ± 15 nA/ppm | - | - | - mA | -20...+50°C | 20,4x16,5mm | Pins for socket | - | - | - | - |
Fabricant
FIGARO
|
FECS42 | Sensor | Electrochemical | Nitrogen dioxide (NO2) | 0...30ppm | - | Current | -600 ± 150 nA/ppm | - | - | - mA | -20...+50°C | 20,4x16,5mm | Pins for socket | - | - | - | - |
Fabricant
FIGARO
|
FECS44 | Sensor | Electrochemical | Ammonia (NH3) | 0...100ppm | - | Current | 100 ± 30 nA/ppm | - | - | - mA | -30...+50°C | 20,4x16,5mm | Pins for socket | - | - | - | - |
Fabricant
FIGARO
|
FECS44 | Sensor | Electrochemical | Ammonia (NH3) | 0...1 000ppm | - | Current | 8 ± 4 nA/ppm | - | - | - mA | -30...+50°C | 20,4x16,5mm | Pins for socket | - | - | - | - |
Fabricant
FIGARO
|
FECS44 | Sensor | Electrochemical | Ammonia (NH3) | 0...200ppm | - | Current | 40 ± 12 nA/ppm | - | - | - mA | -30...+50°C | 20,4x16,5mm | Pins for socket | - | - | - | - |
Fabricant
FIGARO
|
FECS44 | Sensor | Electrochemical | Ammonia (NH3) | 0...5 000ppm | - | Current | 4 ± 2 nA/ppm | - | - | - mA | -30...+50°C | 20,4x16,5mm | Pins for socket | - | - | - | - |
Fabricant
FIGARO
|
FECS45 | Sensor | Electrochemical | Chlorine (Cl2) | 0...10ppm | - | Current | -600 ± 150 nA/ppm | - | - | - mA | -20...+50°C | 20,4x16,5mm | Pins for socket | - | - | - | - |
Fabricant
FIGARO
|
FECS50 | Sensor | Electrochemical | Hydrogen sulfide (H2S) | 0...100ppm | - | Current | 700 ± 150 nA/ppm | - | - | - mA | -40...+50°C | 20,4x16,5mm | Pins for socket | - | - | - | - |
Fabricant
FIGARO
|
KE-LF | Sensor | Electrochemical | Oxygen (O2) | 0...30% | - | Voltage | 0,6 mV/% O2, typ. | ±1% FS *1 | - | - mA | +5...+40°C | D23 x 50 mm | Free wires | Lead-Free, Response time (90%): approx 8 sec. | - | - | *1: When calibrated at both 0% and 30% O2 |
Fabricant
FIGARO
|
KE-LF | Sensor | Electrochemical | Oxygen (O2) | 0...30% | - | Voltage | 0,26 mV/% O2, typ. | ±2% FS *1 | - | - mA | +5...+40°C | D23 x 50 mm | Free wires | Lead-Free, Response time (90%): approx 60 sec. | - | - | *1: When calibrated at both 0% and 30% O2 |
Fabricant
FIGARO
|
NGM2611 | Module | MOS | Methane (CH4) | 300...10 000ppm | 5 000ppm | Voltage, Vout-Vref | - | - | 5V | 66 mA | 0...+40°C | 27x12,5x14,1mm | Connector | TGS2611 sensor | - | - | - |