Electronic components
Germany
€ (EUR)
Prices without VAT
The STS4L temperature sensor is the latest addition to the STS4x family. It offers a 20% cost reduction compared to the STS40-AD1B sensor, with only a slight compromise in accuracy. Its low power consumption of 0.4 µA and wide supply voltage range of 1.08 to 3.6 V make it an ideal choice for battery-powered applications.
Sensirion's innovative STC31-C and STCC4 sensors measure thermal conductivity, calculating gas concentration based on that data. They are suitable for both indoor environments and controlled atmospheres.
Sensirion offers three series of mass flow controllers. But which one to choose? We have compared the features and benefits of the latest Sensirion SFC5400, SFC5500 and SFC6000D series so that you can choose the best solution for your device.
Every generation of Sensirion humidity sensors is not only technically better, but also more affordable. This also applies to the fourth generation of sensors of the SHT4x series.
Temperature data logger manufacturers no longer need to certify their products. All they need to use is ISO/IEC 17025: 2017 calibrated sensor STS32, STS33 or SHT33 from Sensirion.
SEN54-SDN-T, the environmental sensor node Sensirion, integrates particulate matter (PM), volatile organic compound (VOC), relative humidity (RH), temperature (T) sensors and a microcontroller. Now you can bring your product to market faster and with lower development costs. (2 minutes reading)
New product from Sensirion was designed as an intelligent switching and control unit for air quality control devices. It simplifies the design of devices and saves costs in their development.
Check the interior’s concentration of CO2 with the simple reference design, Sensirion SCD4x CO2 Gadget. After measuring the increased CO2 concentration, a light signal on the product will alert you that it is time to ventilate.
You can keep the concentration of formaldehyde at a safe level by frequent ventilation. But how to ventilate effectively? With the SFA30 Sensirion, it's a piece of cake.
The total volatile organic compounds concentration in ppb cannot be measured by using a single MOS sensor, but the VOC index can. Try it out with the SGP40 sensor in the SEK-SVM40 Sensirion development kit. We have it in our stock.
