Linear Technology’s “Silent Switcher” architecture greatly reduces EM emissions.
The LTC2944 is a battery monitor that measures charge, voltage, current and temperature to 1% accuracy, the essential parameters required to accurately assess battery state of charge (SoC)...
LT8641offers Silent Switcher architecture combined with spread spectrum switching frequency modulation, up to 3MHz switching frequency, synchronous rectification, 3 to 65V input voltage range, 3,5A output current and much more.
The LTM2889 is CAN (controller area network) and CAN FD (flexible data rate) compliant microModule transceiver and isolator. It breaks potentially dangerous ground loops and allows reliable communication through CAN bus in harsh environment.
The LTC3127 features a ±4% accurate programmable average input current limit with a 200mA to 1000mA range, making it ideal for GSM modems or Supercapacitor chargers powered from sources with hard limits on output current.
HW design engineers are no longer required to choose between robust fault tolerance and high performance in a RS485 transceivers - the LTC2862 offers both.
The LTC4380 is a micropower linear surge stopper that uses and external N-channel MOSFET and sense resistor to protect loads from high voltage transients and overcurrent conditions.
LTM2881 allows RS485 or RS422 communication even in harsh environment.
Who is the winner of demoboard from Linear technology? In addition to getting to know the winner, you can also watch the video record from webinar...
Did you miss our webinar? Watch the video record...
If we want to obtain a 5V voltage from only 2 NiMH batteries, we´ll face the fact, that the most of common DC/DC circuits doesn´t operate at such a low voltage. LT1304 controller belongs among circuits, which handle this situation without problems and it also provides several extra things.
Isolated offline-flyback controller LT3799 enables to create a powerful LED driver with a minimum of external components, which is moreover compatible with common triac dimmers.