From nowadays offer of relay interface modules, it is already no problem to choose a type meeting requirements of a given application. But if you need to change a configuration of a device, it is often convenient to change only a relay type. Series 93.01 socket enables this easily, because the protection and indication circuit is designed for a wider range of input voltages. This enables to use a 5V, 12V and 24V Finder relays 34.51 series. A green indication diode indicates presence of a control voltage and the protection circuit protects relay against reverse voltage and suppresses voltage spikes appearing at its switching off. When using 93 series socket, it is even possible to use an AC voltage to supply a DC coil of a relay.
Finder 34 series relays are ultra slim 6A relays with a sensitive DC coil. High 6kV isolation provides a safe disjunction of relay coil from contacts. Finder 34.x can be mounted directly to a PCB, via a PCB socket or to a DIN rail by means of the above mentioned socket. In some applications can also be convenient relatively short switching times – 5/3 ms.
Detailed information will provide you the F93 and F34 datasheet.
In case of interest about any Finder product, please contact us at info@soselectronic.com.
- DIN rail socket with a possibility to use 3 types of relays
- built-in protection and indication circuit
- narrow 6A relay
- isolation 6kV/ 8mm
- ambient temperature range -40 to +85°C
- sensitive 150mW DC coil
- cadmium free contacts
- made in EU
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
