In our store can be found all colors of Wago 256

Push the lever, insert a wire, free the lever - that´s all, what is necessary to install wires into the Wago 256 series. Cage clamps Wago 256 enable to assemble wire leads even without a tool. Moreover, modular version of the series 256 offers a possibility to “create” a connector with as many poles, as you just need. Another advantage is the fact, that thanks to seven colors available, it´s possible to color-differentiate particular poles/ signals thus significantly eliminating a possibility of incorrect wire assembly at consequent assembly. Color coding is also advantageous at long multi-pole rows, when for example a color coded each fifth/tenth pole can significantly help to identify a given pole.

Because of a modularity, the connectors are designed as “half-open” i.e. to close a row, it´s necessary to use a plastic end plate marked as 256-x00 (100,200,300,... depending on color). As it uses to be at Wago cage clamps - range of usable wire cross sections is very wide, in this case 0.08-2.5 mm2 and a maximum current is up to 24A. Pin spacing 5/5.08 mm means, that they can be used on a PCB with 5.0 but also 5.08mm pitch (thanks to the modularity).

That´s why, series 256 has ambitions to become a universal PCB connector in your designs, as it enables to create a connector according to your demands. Detailed information will provide you the Wago 256 datasheet, as well as datasheets at particular items.

In case of interest in any Wago component, please contact us at info@soselectronic.com.