L16 module supports system GPS, but also the Russian GLONASS, thus enabling to use almost a double amount of satellites for a better accuracy and higher accuracy even in urban conditions.
This is an archive article published 11/30/2012. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.
Quectel L16 based on Teseo II engine from STMicroelectronics, belongs to first modules supporting both navigation systems. What does it bring? - above all a substantially higher probability of a fast fixing (first fix) even in a dense build-up area or in other conditions inconvenient for reception of satellite signals. A possibility to use signal of both systems enables to increase localization accuracy up to approx. 1.5m. With 32 tracking channels and 2 fast acquisition channels, L16 can acquire and track any mix of GPS and GLONASS signals.
Thanks to the fact, that both systems operate at near frequencies, only one antenna is sufficient for reception. L16 supports passive and active antennas and the power supply voltage for an active antenna can be fed directly through the RF_IN pin. 3.3V voltage for an active antenna can be obtained by a simple interconnection of 2 pins (VCC_RF with V_ANT). In case, that you have an antenna requiring other voltage, you can connect an output of an external voltage source to the V_ANT pin.
Thanks to the fact, that both systems operate at near frequencies, only one antenna is sufficient for reception. L16 supports passive and active antennas and the power supply voltage for an active antenna can be fed directly through the RF_IN pin. 3.3V voltage for an active antenna can be obtained by a simple interconnection of 2 pins (VCC_RF with V_ANT). In case, that you have an antenna requiring other voltage, you can connect an output of an external voltage source to the V_ANT pin.
Quectel L16 features all properties for successful utilization in praxis, and also small dimensions and an easily applicable SMT package. Detailed information will provide you the L16_HD_V1.1 datasheet, as well as L16_Glonass protocol description. For the development support, we also keep in stock the L16_EVBevaluation board. A detailed description can be found in the L16_EVB user guide.
Guide price of the L16 module is 17,70 Eur from 1 pce. We´ll let you know the exact price for your project upon request.
In case of interest, please contact us at sales@soselectronic.com.
Advantages / Features:
- GPS / GLONASS L1 module
- almost double amount of visible satellites improves acquisition speed, accuracy and reliability
- 32 tracking channels, 2 fast acquisition channels
- high sensitivity, -162 dBm/ tracking
- supports passive and active antennas
- UART port for easier application development
- 3.3V power supply
- wide temperature range from -40 to +85 °C
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.