SMD ceramic capacitors are nowadays commonly available in relatively very high capacities of units to tens of uF, while keeping small dimensions (0603 - 1210). There are also available higher capacities in bigger packages, but the offer of producers is especially reach at these small packages (0603-1210) and prices are significantly better in comparison to a recent past. Why to use a ceramic capacitor? First, it has a substantially lower value of ESR than electrolytic capacitors and also lower than tantalum ones. This is reflected in low losses and outstanding filtering properties even at high frequencies and high currents, what is especially beneficial at power supply of fast semiconductors and in switch-mode power supplies. Low power consumption of modern components enables to decrease an overall capacity of capacitors in a power supply part, that´s why in many cases a few uFarads are sufficient. A big advantage is a long lifetime too, because they don´t contain any liquid electrolyte. Naturally, in devices, where high current peaks occur, it would be economically inefficient to use ceramic capacitors only. In such cases a combination of ceramic and tantalum or electrolytic capacitors is ideal.
In our offer can be found more types, also a novelty in our offer - 2,2uF/10V/0805 from the X7R mass from company YAGEO (please note a significantly lower price at purchase of 50 pcs and more). The X7R mass ensures very good properties in a wide range of temperatures and voltages. Detailed information will provide you the X7R, X5R and Y5V documents. In case of interest about any YAGEO component, please contact us at info@soselectronic.com.
- very low ESR
- outstanding filtering properties
- high capacity at small dimensions
- long lifetime
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.