San Marino
€ EUR
Prices without VAT

UT203 clamp multimeters „see“ even a DC current

In a very affordable price level, a multimeter able to measure a DC current without interruption of a measured circuit can be found.
This is an archive article published 05/15/2013. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.
UT203 UT203 from company UNI-Trend belongs to a category of clamp multimeters. A main reason to buy a clamp multimeter is usually a requirement to measure current flowing through a wire without its disconnection. A possibility to measure current without (a short-time) disconnection of a circuit is naturally convenient for several reasons - measurement speed, safety point of view and last but not least - in many cases it is impossible or very complicated to switch off a measured circuit and to connect an ammeter into series. Times, when such a device was “only” an Ammeter are a long time away and modern clamp multimeters are literally universal devices, often able to replace common multimeters. A big majority of clamp multimeters is able to measure only an alternate current (AC). More sophisticated devices, to which also UT203 belongs, are able to measure even a direct current (by means of a Hall detector).

As clamp multimeters measure current on the base of magnetic field induced around a lead, it is only possible to measure current of wires, which are accessible separately - for example in distribution boxes, at terminals of devices and similar. In principle it´s also possible to measure current flowing through several wires at once, but it´s necessary to take in mind, that a measured value will respond to a vector summary of currents, thus it will depend on a mutual phase (at AC current) and or on the direction (at DC current) of current in wires.

UT203 represents a modern multimeter with an automatic range selection and a max display reading of 3999. Neither other measuring parameters are not impoverished - voltage can be measured in five or four ranges respectively (DC/AC) and resistance even in six ranges of 400Ohm to 40 MOhm. UT203 also offers measuring of frequency (in 7 ranges), duty cycle, diode test and continuity test (0-50 Ohm). Range selection is automatic with a possibility of a manual selection. Detailed information will provide you the UT203 user guide.

In case of interest, please contact us at info@soselectronic.com.

UT203 clamp multimeters „see“ even a DC current

Advantages / Features:
  • modern clamp multimeter with automatic range selection and 3999 max display reading
  • also measures DC current
  • measures U, I, Ohm, D, f
  • diode and continuity test
  • Data Hold and Rel function
  • robust and ergonomic construction
  • max jaw opening of 28 mm
  • power supply 9V battery 6F22 (included)
Do not miss these articles

Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.

Additional products

UT203 UNI-T
UNI-T

Ord.number: 102881

UT203

Clamp Multimeters

Clamp meter I AC/DC, U,R,f,Duty Cycle, auto

No longer available

Get Quote
PMS 2600 (972338001) HIRSCHMANN-SKS
HIRSCHMANN-SKS

Ord.number: 48725

in stock 2 pcs

PMS 2600 (972338001)

Measuring Leads

Test Equipment Set KLEPS 2600, PRUEF 2600, AK 2 B, MLS GG 100/1

1 pcs+ 32,90 €

2 pcs+ 32,00 €

10 pcs+ 29,70 €

  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare
Do you agree with cookies being stored?
Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.
The proper operation of the website
More stable technical control
Better marketing offer
Necessary Only selected Accept all cookies
Change the settings
Country
Select the country you are located in to receive relevant information and services tailored to your region.
Choose a language
Select your preferred language for displaying website content and communicating with our support.
Currency
Select the currency in which you want to see product prices. This way, we ensure you see current prices tailored to your needs.
Show prices with VAT
Select whether you want to display prices with or without VAT to have a better overview of costs.
Prices without VAT Prices incl. VAT