We already know, that Switches MEC Unimec switch in up to eight ways and also that they´re available as momentary or alternate (latching). UNIMEC switches feature perhaps only one “disadvantage” - that on the same PCB no other higher components can be used (which would be higher than the switch). If you´re satisfied with the UNIMEC features, but despite that you cannot use them in your application right for their (low) height, we have for you a solution. It is based on usage of the „16270 extender“. In combination with any right-angle cap of the 16300 series and with a prolonged bezel 16324 (16325,16326) we gain by this combination a switch higher in 4.5 mm. This simple solution is also suitable for cases don´t have high components on a PCB but from any reason it´s advantageous, when some room will be left between a front panel and a PCB (for cooling, ...)
Detailed information will provide you the MEC 16324-16326 brochure and the Unimec datasheet.
Selected types are in stock and upon request we´re able to provide you any other components from MEC.
In case of interest, please contact us at sales@soselectronic.com.
- extender 16270 to gain extra 4.5mm to the height of the switch
- for all caps of the 16300 series
- quality 2-pole switches
- 250 mA/120V, 9W AC, 6W DC
- 8 ways to connect
- gold- or silver-coated contacts
- high-temperature version is also available (up to 160°C)
- momentary/ latching-alternate version
- IP54 protection
- with or without LED indication
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
We already know, that Switches MEC Unimec switch in up to eight ways and also that they´re available as momentary or alternate (latching). UNIMEC switches feature perhaps only one “disadvantage” - that on the same PCB no other higher components can be used (which would be higher than the switch). If you´re satisfied with the UNIMEC features, but despite that you cannot use them in your application right for their (low) height, we have for you a solution. It is based on usage of the „16270 extender“. In combination with any right-angle cap of the 16300 series and with a prolonged bezel 16324 (16325,16326) we gain by this combination a switch higher in 4.5 mm. This simple solution is also suitable for cases don´t have high components on a PCB but from any reason it´s advantageous, when some room will be left between a front panel and a PCB (for cooling, ...)
Detailed information will provide you the MEC 16324-16326 brochure and the Unimec datasheet.
Selected types are in stock and upon request we´re able to provide you any other components from MEC.
In case of interest, please contact us at sales@soselectronic.com.
- extender 16270 to gain extra 4.5mm to the height of the switch
- for all caps of the 16300 series
- quality 2-pole switches
- 250 mA/120V, 9W AC, 6W DC
- 8 ways to connect
- gold- or silver-coated contacts
- high-temperature version is also available (up to 160°C)
- momentary/ latching-alternate version
- IP54 protection
- with or without LED indication
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.