|
Producent
GEEHY
|
APM32F405 | Cortex-M4F | 168 MHz | 1024KB FLASH | - | 192KB | CF, LCD 8080/6800, NAND FLASH, NOR FLASH, SDRAM, SRAM | 114 | CAN x2, I2C x2, I2S x2, SDIO, SPI x3, UART x2, USART x4 | USB 2.0 OTG FS, HS, HS ULPI | A/D 12bit x24, D/A 12bit x2, Temp. Sensor | 1,8 V | 3,6 V | -40...+85°C | SMD | 144-LQFP | MSL 3 | Tray 60 | 16bit Motor Control PWM x2, RNG, RTC and 4KB RAM with Battery Backup | - |
|
Producent
GEEHY
|
APM32F407 | Cortex-M4F | 168 MHz | 1024KB FLASH | - | 192KB | CF, LCD 8080/6800, NAND FLASH, NOR FLASH, SDRAM, SRAM | 140 | CAN x2, I2C x2, I2S x2, SDIO, SPI x3, UART x2, USART x4 | Ethernet 10/100Mb MII/RMII, USB 2.0 OTG FS, HS, HS ULPI | A/D 12bit x24, D/A 12bit x2, Temp. Sensor | 1,8 V | 3,6 V | -40...+85°C | SMD | 176-LQFP | MSL 3 | Tray 40 | 16bit Motor Control PWM x2, Camera Interface, RNG, RTC and 4KB RAM with Battery Backup | - |
|
Producent
GEEHY
|
APM32F407 | Cortex-M4F | 168 MHz | 512KB FLASH | - | 192KB | CF, LCD 8080/6800, NAND FLASH, NOR FLASH, SDRAM, SRAM | 82 | CAN x2, I2C x2, I2S x2, SDIO, SPI x3, UART x2, USART x4 | Ethernet 10/100Mb MII/RMII, USB 2.0 OTG FS, HS, HS ULPI | A/D 12bit x24, D/A 12bit x2, Temp. Sensor | 1,8 V | 3,6 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | Tray 90 | 16bit Motor Control PWM x2, Camera Interface, RNG, RTC and 4KB RAM with Battery Backup | - |
|
Producent
GEEHY
|
APM32F407 | Cortex-M4F | 168 MHz | 512KB FLASH | - | 192KB | CF, LCD 8080/6800, NAND FLASH, NOR FLASH, SDRAM, SRAM | 114 | CAN x2, I2C x2, I2S x2, SDIO, SPI x3, UART x2, USART x4 | Ethernet 10/100Mb MII/RMII, USB 2.0 OTG FS, HS, HS ULPI | A/D 12bit x24, D/A 12bit x2, Temp. Sensor | 1,8 V | 3,6 V | -40...+85°C | SMD | 144-LQFP | MSL 3 | Tray 60 | 16bit Motor Control PWM x2, Camera Interface, RNG, RTC and 4KB RAM with Battery Backup | - |
|
Producent
GEEHY
|
APM32F411 | Cortex-M4F | 120 MHz | 512 KB FLASH | n/a | 128 KB | - | 36 | CAN x2, I2C, SDIO, SPI/I2S x3, UART x1, USART x3 | USB 2.0 OTG | A/D 12bit x10, Analog Comparator x2, Temp. Sensor | 1,7 V | 3,6 V | -40...+85°C | SMD | 48-QFN | MSL 3 | Tray 250 | 16bit Motor Control PWM x2, RNG, CRC, RTC with Battery Backup | - |
|
Producent
GEEHY
|
APM32F415 | Cortex-M4F | 168 MHz | 1024KB FLASH | - | 192KB | CF, LCD 8080/6800, NAND FLASH, NOR FLASH, SDRAM, SRAM | 82 | CAN x2, I2C x2, I2S x2, SDIO, SPI x3, UART x2, USART x4 | Ethernet 10/100Mb MII/RMII, USB 2.0 OTG FS, HS, HS ULPI | A/D 12bit x24, D/A 12bit x2, Temp. Sensor | 1,8 V | 3,6 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | Tray 90 | 16bit Motor Control PWM x2, HASH (MD5, SHA-1), HMAC, HW Accel. AES, DES, TDES, RNG, RTC with Battery Backup | - |
|
Producent
GEEHY
|
APM32F415 | Cortex-M4F | 168 MHz | 1024KB FLASH | - | 192KB | CF, LCD 8080/6800, NAND FLASH, NOR FLASH, SDRAM, SRAM | 114 | CAN x2, I2C x2, I2S x2, SDIO, SPI x3, UART x2, USART x4 | Ethernet 10/100Mb MII/RMII, USB 2.0 OTG FS, HS, HS ULPI | A/D 12bit x24, D/A 12bit x2, Temp. Sensor | 1,8 V | 3,6 V | -40...+85°C | SMD | 144-LQFP | MSL 3 | Tray 60 | 16bit Motor Control PWM x2, HASH (MD5, SHA-1), HMAC, HW Accel. AES, DES, TDES, RNG, RTC with Battery Backup | - |
|
Producent
GEEHY
|
APM32F417 | Cortex-M4F | 168 MHz | 1024KB FLASH | - | 192KB | CF, LCD 8080/6800, NAND FLASH, NOR FLASH, SDRAM, SRAM | 140 | CAN x2, I2C x2, I2S x2, SDIO, SPI x3, UART x2, USART x4 | Ethernet 10/100Mb MII/RMII, USB 2.0 OTG FS, HS, HS ULPI | A/D 12bit x24, D/A 12bit x2, Temp. Sensor | 1,8 V | 3,6 V | -40...+85°C | SMD | 176-LQFP | MSL 3 | Tray 40 | 16bit Motor Control PWM x2, Camera Interface, HASH (MD5, SHA-1), HMAC, HW Accel. AES, DES, TDES, RNG, RTC and 4KB RAM with Battery Backup | - |
|
Producent
GEEHY
|
APM32F417 | Cortex-M4F | 168 MHz | 1024KB FLASH | - | 192KB | CF, LCD 8080/6800, NAND FLASH, NOR FLASH, SRAM | 82 | CAN x2, I2C x2, I2S x2, SDIO, SPI x3, UART x2, USART x4 | USB 2.0 OTG FS, HS, HS ULPI | A/D 12bit x24, D/A 12bit x2, Temp. Sensor | 1,8 V | 3,6 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | Tray 90 | 16bit Motor Control PWM x2, HASH (MD5, SHA-1), HMAC, HW Accel. AES, DES, TDES, RNG, RTC and 4KB RAM with Battery Backup | - |
|
Producent
GEEHY
|
APM32F417 | Cortex-M4F | 168 MHz | 1024KB FLASH | - | 192KB | CF, LCD 8080/6800, NAND FLASH, NOR FLASH, SRAM | 114 | CAN x2, I2C x2, I2S x2, SDIO, SPI x3, UART x2, USART x4 | USB 2.0 OTG FS, HS, HS ULPI | A/D 12bit x16, D/A 12bit x2, Temp. Sensor | 1,8 V | 3,6 V | -40...+85°C | SMD | 144-LQFP | MSL 3 | Tray 60 | 16bit Motor Control PWM x2, HASH (MD5, SHA-1), HMAC, HW Accel. AES, DES, TDES, RNG, RTC and 4KB RAM with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | CAN 2.0 x2, I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | Ethernet 10/100Mb PHY, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | T&R 1000 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | CAN 2.0 x2, I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | Ethernet 10/100Mb PHY, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | Tray 90 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | CAN 2.0 x2, I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | Ethernet 10/100Mb PHY, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-QFN | MSL 3 | T&R 1000 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | CAN 2.0 x2, I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | Ethernet 10/100Mb PHY, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3.63 V | -40...+85°C | SMD | 100-QFN | MSL 3 | Tray 152 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | Ethernet 10/100Mb PHY, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | T&R 1000 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | Ethernet 10/100Mb PHY, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2.97 V | 3.63 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | Tray 90 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | Ethernet 10/100Mb PHY, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-QFN | MSL 3 | T&R 1000 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | Ethernet 10/100Mb PHY, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-QFN | MSL 3 | Tray 152 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | CAN 2.0 x2, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | T&R 1000 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | CAN 2.0 x2, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | Tray 90 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | CAN 2.0 x2, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-QFN | MSL 3 | T&R 100 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | 3 | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | CAN 2.0 x2, USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-QFN | n/a | Tray 152 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | T&R 1000 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-LQFP | MSL 3 | Tray 90 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
|
Producent
BRIDGETEK
|
FT90x | FT32 | 100 MHz | 256 KB Flash | - | 64 KB + 256 KB Shadow RAM | - | 66 | I2C x2, I2S, SDIO, SPI single/dual/quad mode, UART x2 | USB 2.0 Device, BCD, USB 2.0 Host HS, EHCI, BCD | A/D 10bit x7, D/A 10bit x2 | 2,97 V | 3,63 V | -40...+85°C | SMD | 100-QFN | MSL 3 | T&R 1000 | Camera Interface, Parallel 8-bit, PWM x5, PWM PCM 8-bi/16bit audio x2, RTC with Battery Backup | - |
