Notice
You are currently browsing the website for customers from Switzerland. We recommend switching to the United States version of the site, optimized for your region.
Manufacturer
FTDI
|
FT-X | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART | 4 configurable GPIO, Battery Charger Detection, config. EEPROM | 3…5,5 V | SMD | 16-QFN | MSL 3 | - |
Manufacturer
FTDI
|
FT-X | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART | 4 configurable GPIO, Battery Charger Detection, config. EEPROM | 3…5,5 V | SMD | 16-SSOP | MSL 3 | - |
Manufacturer
FTDI
|
FT260 | USB HID Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (Full) / 422 UART / 485 UART, I2C Master | 12 Configurable GPIO, eFUSE config, supports I2C EEPROM | 3…5,5 V | SMD | 28-QFN | MSL 3 | - |
Manufacturer
FTDI
|
FT4232 | USB Bridge | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x4, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 64-LQFP | MSL 3 | - |
Manufacturer
FTDI
|
VNC1 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (Full) / 422 UART / 485 UART, FIFO, SPI Slave | 28 GPIO | 3...3,6 V | SMD | 48-LQFP | MSL 3 | - |
Manufacturer
FTDI
|
VNC2 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (Full)c / 422 UART / 485 UART, SPI Master, SPI Slave | 3 GPIO | 3...3,6 V | SMD | 48-LQFP | MSL 3 | - |
Manufacturer
WIZNET
|
W61xx | n/a | n/a | n/a | n/a | n/a | SMD | LQFP48 | n/a | - |
Manufacturer
FTDI
|
FT232R | USB Bridge | USB 2.0 Device 12 Mbit/s | 232 UART (Full) / 422 UART / 485 UART | Config. EEPROM | 4...5,25 V *1 | SMD | 28-SSOP | MSL 3 | *1: 3,3...5,5 V with external oscillator |