Lantronix xPico WiFi module may be already familiar to you from our articles, for example: xPico WiFi is a dream come true for producers and customers where we also mention the HW compatibility with the xPico module ( wired, serial-to-Ethernet modul). New version - xPico WiFi SMT brings the same functionality as xPico WiFi and as the name saysm it´s intended for a direct soldering by an SMT (reflow) process, together with other components on a PCB. In contrast to original version which has an SMT (board-to-board) connector, SMT version is designed similarly like many GSM/GPS modules, i.e. as a module on a carrying PCB with soldering pads on PCB sides (half-vias, plus gnd on a bottom).
At the same time, SMT version is also available with integrated small ceramic antenna, so no external antenna is required. Just this version XPCW1003100B we keep as a standard stock item. Perhaps the biggest advantage of SMT version is this possibility of a direct soldering bringing a very high mechanical stability – also suitable for applications with a higher risk of vibrations.
xPico WiFi SMT is the same powerful („device server“) as a previous version and offers easiest way how to add WiFi connectivity into a target device, practically without a necessity to write a single line of code.
Simultaneous AP (Access Point) with a DHCP server and Client mode also enable a direct access – communication with other WiFi device, for example with a tablet or a smartphone.
Detailed information will provide you the xPico WiFi SMT brochure, xPico WiFi SMTi datasheet and the xPico WiFi SMT integration guide.
In case of interest, please contact us at sales@soselectronic.com.
- miniature and complete embedded device server in an SMT version including antenna
- IEEE 802.11 b/g/n (2,4 GHz), WPS 2.0
- Low power consumption (6uA standby)
- simultaneous soft AP and Client mode
- simple communication with tablets and smartphones
- dual serial port (up to 921 kbps)
- 3,3V interface (5V tolerant)
- SPI (up to 20 MHz)
- USB 2.0 full rate, 8 GPIO
- Eliminates need for a costly SW and FW development
- Small size - 24 x 16,5 x 7,4mm
- 256-bit AES encryption
- Industrial range of operating temperatures -40 to +85°C
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
Lantronix xPico WiFi module may be already familiar to you from our articles, for example: xPico WiFi is a dream come true for producers and customers where we also mention the HW compatibility with the xPico module ( wired, serial-to-Ethernet modul). New version - xPico WiFi SMT brings the same functionality as xPico WiFi and as the name saysm it´s intended for a direct soldering by an SMT (reflow) process, together with other components on a PCB. In contrast to original version which has an SMT (board-to-board) connector, SMT version is designed similarly like many GSM/GPS modules, i.e. as a module on a carrying PCB with soldering pads on PCB sides (half-vias, plus gnd on a bottom).
At the same time, SMT version is also available with integrated small ceramic antenna, so no external antenna is required. Just this version XPCW1003100B we keep as a standard stock item. Perhaps the biggest advantage of SMT version is this possibility of a direct soldering bringing a very high mechanical stability – also suitable for applications with a higher risk of vibrations.
xPico WiFi SMT is the same powerful („device server“) as a previous version and offers easiest way how to add WiFi connectivity into a target device, practically without a necessity to write a single line of code.
Simultaneous AP (Access Point) with a DHCP server and Client mode also enable a direct access – communication with other WiFi device, for example with a tablet or a smartphone.
Detailed information will provide you the xPico WiFi SMT brochure, xPico WiFi SMTi datasheet and the xPico WiFi SMT integration guide.
In case of interest, please contact us at sales@soselectronic.com.
- miniature and complete embedded device server in an SMT version including antenna
- IEEE 802.11 b/g/n (2,4 GHz), WPS 2.0
- Low power consumption (6uA standby)
- simultaneous soft AP and Client mode
- simple communication with tablets and smartphones
- dual serial port (up to 921 kbps)
- 3,3V interface (5V tolerant)
- SPI (up to 20 MHz)
- USB 2.0 full rate, 8 GPIO
- Eliminates need for a costly SW and FW development
- Small size - 24 x 16,5 x 7,4mm
- 256-bit AES encryption
- Industrial range of operating temperatures -40 to +85°C
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.