CleO35 is based on FTDI’s FT810 - Advanced Embedded Video Engine (EVE2) and FT903 - 32-bit FT903 Super Bridging Microcontroller.
FT810 controls display and senses 4-wire resistive touch panel. It can recognize touch tags and track touch movement. Built-in sound synthesizer generates notification sounds which are played through PWM audio output. FT810 can also play audio recorded in RAM. FT810 can play audio and video in AVI container (MJPEG (Motion Encoded JPEG) video and 4 Bit IMA ADPCM, 8 Bit signed PCM, 8 Bit u-Law audio).
To simplify HMI design FT810 provides drawing of widgets buttons, clocks, keys, gauges, text displays, progress bars, sliders, toggle switches, dials, gradients, etc. and animated functionalities such as displaying logo, calibration, spinner, screen saver and sketch. It supports mirroring and rotating display on the fly (REG ROTATE) and bitmap rotating, scaling and translating. To adjust the touch screen accordingly CMD SETROTATE can be used.
FT903 takes care about data to be displayed. It processes data from SPI slave interface which is pin configurable to support both 5V and 3,3V voltage levels. Typical source of data is NerO or other Arduino UNO compatible board. FT903 can also process data from microSD memory card, camera or onboard 8MB Q-SPI Flash and send them to FT810 through Q-SPI interface. Additional SPI and UART interfaces allow connect Wi-Fi, Bluetooth or LoRa wireless module for example. Additional temperature, humidity sensors or gas sensor module like USM-MEMS-VOC can be connected through I2C.
CleO35 builds on the widespread popularity of Arduino and the countless compatible shields that are out there, but it is not another shield or development board. On the contrary, it is CE and FCC certified product targeted for embedding into end product.
We also provide Cleo35 accessories: CleO-Camera, CleO-Speaker, CleO-RIO CleO-RIO (connector board for attaching to Arduino), wide range of mikćroSD memory cards and NerO of course.
•CE and FCC certified.
•Complete access to a comprehensive development resource, which has step-by-step tutorials and projects, plus a series of software tools.
•Dedicated site with support forum www.CleOstuff.com
•Can be easily programmed by almost anyone to give professional looking HMI / GUI's with no prior knowledge of complex graphics programming or mathematics.
•Smooth animation of graphical content, even at 60fps frame rates.
For more information please see Cleo documentation. For further information about FTDI products please look at our FTDI’s web pages or contact us at sales@soselectronic.com.
- Landscape and portrait modes supported.
- Anti-Aliased graphics throughout for much finer image quality with no artifacts in raster images, objects are rendered with 1/16th of a pixel resolution.
- File system supports up to 8 simultaneous file operations.
- Fast direct file transfers between micro-SD/Q-SPI Flash and the Graphics subsystem without using Arduino UNO resources.
- Module with panel mountable bezel ready for embedding.
- Micro SD card socket support.
- Built in 8MByte Q-SPI Flash memory.
- USB DFU (Device Firmware Upgrade) port for firmware updates.
- Serial Camera Control Bus (SCCB) interface.
- Built in 1,25W/8Ohm speaker amplifier
- Designed as Arduino and NerO shield.
- CE and FCC certified.
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
