As clamp multimeters measure current on the base of magnetic field induced around a lead, it is only possible to measure current of wires, which are accessible separately - for example in distribution boxes, at terminals of devices and similar. In principle it´s also possible to measure current flowing through several wires at once, but it´s necessary to take in mind, that a measured value will respond to a vector summary of currents, thus it will depend on a mutual phase (at AC current) and or on the direction (at DC current) of current in wires.
UT203 represents a modern multimeter with an automatic range selection and a max display reading of 3999. Neither other measuring parameters are not impoverished - voltage can be measured in five or four ranges respectively (DC/AC) and resistance even in six ranges of 400Ohm to 40 MOhm. UT203 also offers measuring of frequency (in 7 ranges), duty cycle, diode test and continuity test (0-50 Ohm). Range selection is automatic with a possibility of a manual selection. Detailed information will provide you the UT203 user guide.
In case of interest, please contact us at info@soselectronic.com.
- modern clamp multimeter with automatic range selection and 3999 max display reading
- also measures DC current
- measures U, I, Ohm, D, f
- diode and continuity test
- Data Hold and Rel function
- robust and ergonomic construction
- max jaw opening of 28 mm
- power supply 9V battery 6F22 (included)
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.