Very often used centralized control of devices from a distribution box via relay interface modules offers several benefits. This solution enables for example a transparent and quick installation, simple functionality test and easy changes in configuration if necessary. To place switching elements to a DIN rail can in many cases substantially increase the immunity to disturbances. It is thanks to the fact, that when a relay interface module is placed in a distribution box near a controlling electronics, wires leading to the module are very short. By this we avoid parallel layout of control wires with other power-line wires, often few tens of meters long, from which a current able to switch on a relay could be inducted in extreme cases.
Finder 48 are powerful relay interface modules in versions with one or two changeover contacts. They are available with a coil for DC or AC voltage as well as with screw or screwless terminals. From our stock we offer you 2 versions - 48.52 and 48.61 with a sensitive DC coil with only a 0.5 W power consumption. Interface modules already contain components protecting against wrong voltage polarity, for EMC suppression as well as indication circuit with a LED.
Besides high 16/8A switching currents offer Finder 48 also a high level of safety thanks to an up to 6 kV insulation voltage (coil/contacts). Finder 48 enable instant relay rejection by means of a plastic retaining clip, what makes an inspection or exchange of a relay easier. Also available is the jumper link for a mutual interconnection of several interface modules.
Detailed information will provide you the Finder 48 datasheet.
In case of interest please contact us at info@soselectronic.com.
- relay interface module for a DIN rail
- versions with 1 or 2 changeover contacts
- 8/16A 250V AC rated current
- 10*10E6 mechanical life
- ambient temperature range -40 to +70°C
- only 0.5W power consumption (DC versions)
- contains components for EMC coil suppression and indication status LED
- made in EU
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
Very often used centralized control of devices from a distribution box via relay interface modules offers several benefits. This solution enables for example a transparent and quick installation, simple functionality test and easy changes in configuration if necessary. To place switching elements to a DIN rail can in many cases substantially increase the immunity to disturbances. It is thanks to the fact, that when a relay interface module is placed in a distribution box near a controlling electronics, wires leading to the module are very short. By this we avoid parallel layout of control wires with other power-line wires, often few tens of meters long, from which a current able to switch on a relay could be inducted in extreme cases.
Finder 48 are powerful relay interface modules in versions with one or two changeover contacts. They are available with a coil for DC or AC voltage as well as with screw or screwless terminals. From our stock we offer you 2 versions - 48.52 and 48.61 with a sensitive DC coil with only a 0.5 W power consumption. Interface modules already contain components protecting against wrong voltage polarity, for EMC suppression as well as indication circuit with a LED.
Besides high 16/8A switching currents offer Finder 48 also a high level of safety thanks to an up to 6 kV insulation voltage (coil/contacts). Finder 48 enable instant relay rejection by means of a plastic retaining clip, what makes an inspection or exchange of a relay easier. Also available is the jumper link for a mutual interconnection of several interface modules.
Detailed information will provide you the Finder 48 datasheet.
In case of interest please contact us at info@soselectronic.com.
- relay interface module for a DIN rail
- versions with 1 or 2 changeover contacts
- 8/16A 250V AC rated current
- 10*10E6 mechanical life
- ambient temperature range -40 to +70°C
- only 0.5W power consumption (DC versions)
- contains components for EMC coil suppression and indication status LED
- made in EU
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.