Electronic components
France
€ (EUR)
Prices without VAT
Modern spread spectrum modulation enables HopeRF LoRa modules to communicate on a long-distance or in severe environment.
With the enormous growth of IoT devices connected to the networking, it became evident that far more addresses would be needed to connect devices than the IPv4 address space had available. Wiznet has a solution.
ESP-Jumpstart is Espressif’s new reference guide which aims to help developers convert their ideas into actual products as quickly as possible.
The higher energy efficiency, maintaining the quality and a lower cost. These parameters were the cornerstones for the new THL15WI family from TRACO in a 1 x 1 x 0.4″ metal case.
MIFARE® RFID technology is a mainstream almost in every segment of our everyday life thanks to high security and easy to use. As an authorized distributor, we will provide you with RFID modules according to your needs.
There is always a challenge for engineers to include a battery compartment into a battery powered device. We have prepared an interesting video for you with an overview of the battery holders for different battery cells.
The series of small DC/DC TRACO converters in the DIP16 package has a wide range of input and output voltages and its parameters are predestined for the use in medical devices, but they also work in industrial applications without any problem.
The only available radio chip for LoRa on the market has been the SX1272/76 from Semtech up to now. Things have changed and company IMST came up with the new type of radio chip SX1280 which can work on 2.4GHz band and decided to use this chip for their new LoRaWAN Long Range module, the iM282A-L.
The TEQ-40WIR series is a family of isolated high performance DC-DC converter modules with ultra-wide 4:1 input voltage ranges and operating temperature of up to +92°C and it comes in a rugged metal case.
Things are getting smaller (except for cars) and this is true also for antennas. 2JE18 is a small surface mounted antenna with dimensions of only 40x7x3mm. It is designed for a surface mounting directly on PCB- and thanks to its excellent parameters, it is intended to be used in IoT devices.
For the IoT era, a reliable and long lasting power source is essential. The most advanced primary batteries use Li-SoCl2 formula to deliver required energy.
If you need highly reliable and secure data transfer over WiFi, xPico Wifi240/250 is the right solution for you.
