If you’re an electrician or technician who is responsible for keeping industrial systems and processes up and running safely, efficiently, and cost effectively you know that the quicker you can find a problem, the quicker you can fix it.
This is an archive article published 07/08/2016. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.
Now the promised 5 reasons to buy this instrument:
1) Find, repair, validate, and report on electrical, HVAC, and mechanical problems with one tool.
A thermal imager and DMM combination can help you troubleshoot and verify potential electrical problems faster. Rather than having to probe every breaker, or tighten every screw on every breaker, you can use the thermal imager to quickly identify hot spots. Turn to the volts and amps measurements to diagnose the problem. Then make the repair and capture an “after” image to verify the repair. You can save the images and measurements and upload them to a PC or to the Fluke Cloud™ and easily create reports with Fluke Connect software. In addition to saving time, you’ll save room in your tool bag.
2) Increased productivity.
With a Fluke Connect-enabled thermal multimeter you can typically resolve problems in one trip and save the hassle of having to hunt down a shared thermal imager.
Start by scanning the equipment to get a good idea of where the problem is.
3) Extend your capabilities
You already know how to use a DMM. The thermal imager with 279 FC is so intuitive that you can get started right away. Just turn the dial to “IR Camera” and scan the area of interest. When you see a hot spot or cold spot, as indicated by the heat signature, you’ll know where to connect the DMM to troubleshoot further.
1) Find, repair, validate, and report on electrical, HVAC, and mechanical problems with one tool.
A thermal imager and DMM combination can help you troubleshoot and verify potential electrical problems faster. Rather than having to probe every breaker, or tighten every screw on every breaker, you can use the thermal imager to quickly identify hot spots. Turn to the volts and amps measurements to diagnose the problem. Then make the repair and capture an “after” image to verify the repair. You can save the images and measurements and upload them to a PC or to the Fluke Cloud™ and easily create reports with Fluke Connect software. In addition to saving time, you’ll save room in your tool bag.
2) Increased productivity.
With a Fluke Connect-enabled thermal multimeter you can typically resolve problems in one trip and save the hassle of having to hunt down a shared thermal imager.
Start by scanning the equipment to get a good idea of where the problem is.
3) Extend your capabilities
You already know how to use a DMM. The thermal imager with 279 FC is so intuitive that you can get started right away. Just turn the dial to “IR Camera” and scan the area of interest. When you see a hot spot or cold spot, as indicated by the heat signature, you’ll know where to connect the DMM to troubleshoot further.
4)
Built-in iFlex integration
Plug in the iFlex wireless current probe to the DMM and instantly extend your current measurement capability to 2500 A. The iFlex current probe fits around large conductors and in tight awkward spaces. With the integrated iFlex technology inside the 279 FC, you see the actual amperage measurement on your display and no longer have to make complicated conversions. Plus, both the meter and the probe are Fluke Connect capable so you can set them up at the test point and move out of the hazard zone and read current measurements on your smartphone with the Fluke Connect mobile app.
5) Extra value features
• Large 3.5 inch (8.9 cm) color LCD makes it easier and faster to locate potential problems with a thermal image.
• Minimum 10 hour battery life lets you work a complete shift without having to recharge or change batteries.
• Independently tested CAT IV 600V/ CAT III 1000 V safety rating makes it a great choice for industrial applications.
• Assembled rugged in USA to stand up to harsh industrial environments.
Plug in the iFlex wireless current probe to the DMM and instantly extend your current measurement capability to 2500 A. The iFlex current probe fits around large conductors and in tight awkward spaces. With the integrated iFlex technology inside the 279 FC, you see the actual amperage measurement on your display and no longer have to make complicated conversions. Plus, both the meter and the probe are Fluke Connect capable so you can set them up at the test point and move out of the hazard zone and read current measurements on your smartphone with the Fluke Connect mobile app.
5) Extra value features
• Large 3.5 inch (8.9 cm) color LCD makes it easier and faster to locate potential problems with a thermal image.
• Minimum 10 hour battery life lets you work a complete shift without having to recharge or change batteries.
• Independently tested CAT IV 600V/ CAT III 1000 V safety rating makes it a great choice for industrial applications.
• Assembled rugged in USA to stand up to harsh industrial environments.
With all these capabilities a thermal multimeter is likely to become the cornerstone of any technician’s tool bag. It saves space, saves time, and can increase your productivity and confidence by helping you find, repair, validate, and report electrical issues faster and easier.
In case of interest please contact us at sales@soselectronic.com.
Videos
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
