|
Manufacturer
SGX SENSORTECH
|
4 series | Sensor | Electrochemical | Carbon monoxide (CO) | 0...500ppm | - | Current | 70 ± 15 nA/ppm | - | - | - mA | -20...+50°C | D20x16,6mm | Pins for socket | - | - | - | - |
|
Manufacturer
SGX SENSORTECH
|
4 series | Sensor | Electrochemical | Ethylene oxide (C2H4O) | 0...500ppm | - | Current | - | - | - | - mA | - | D20x16,6mm | Pins for socket | - | - | - | - |
|
Manufacturer
SGX SENSORTECH
|
4 series | Sensor | Electrochemical | Oxygen (O2) | 0...30% | - | Current | 350 ± 50 uA at 20,9% O2 | - | - | - mA | -20...+55°C | D20x16,6mm | Pins for socket | - | - | - | - |
|
Manufacturer
SGX SENSORTECH
|
- | Accessory | - | - | - | - | - | - | - | - | - mA | - | - | - | - | - | - | - |
|
Manufacturer
FIGARO
|
KE | Sensor | Electrochemical | Oxygen (O2) | 0...100% | - | Voltage | 0,64 mV/% O2, typ | ±1% FS *1 | - | - mA | +5...+40°C | D28 x 47,3mm | Free wires | Response time (90%): approx 15 sec. | - | - | *1: When calibrated at both 0% and 100% O2 |
|
Manufacturer
FIGARO
|
KE | Sensor | Electrochemical | Oxygen (O2) | 0...100% | - | Voltage | - | ±1% | - | - mA | +5...+40°C | 28x47,3mm | Connector on cable | Virtually no influence from CO2, CO, H2S, NOx, H3 | - | - | - |
|
Manufacturer
FIGARO
|
KE | Sensor | Electrochemical | Oxygen (O2) | 0...100% | - | Voltage | 0,6 mV/% O2, typ. | ±1% FS *1 | - | - mA | +5...+40°C | D23 x 50 mm | Free wires | - | - | - | *1: When calibrated at both 0% and 100% O2 |
|
Manufacturer
FIGARO
|
KE | Sensor | Electrochemical | Oxygen (O2) | 0...100% | - | Voltage | - | ±1% | - | - mA | +5...+40°C | D57x23mm | Connector on cable | Virtually no influence from CO2, CO, H2S, NOx, H5 | - | - | - |
|
Manufacturer
FIGARO
|
KE | Sensor | Electrochemical | Oxygen (O2) | 0...100% | - | Voltage | - | ±2% | - | - mA | +5...+40°C | 28x47,3mm | Connector on cable | Virtually no influence from CO2, CO, H2S, NOx, H6 | - | - | - |
|
Manufacturer
SGX SENSORTECH
|
- | Sensor | Catalytic | Combustible gases | 0...5% CH4 | - | ΔR | 12mV/% CH4, Min. | - | 3V | 34...42mA mA | -20...+60°C | D14,4x6,7mm | SMD | ATEX: II 1G Ex ia IIC Ga, I M1 Ex ia I Ma, IECEx: Ex ia IIC | - | - | - |
|
Manufacturer
SGX SENSORTECH
|
- | Sensor | Catalytic | Combustible gases | 0...5% CH4 | - | ΔR | 12mV/% CH4, Min | - | 3V | 34...42mA mA | -20...+60°C | D14,4x6,7mm | SMD | ATEX: II 1G Ex da IIC Ga, I M1 Ex da I Ma, IECEx: Ex da IIC | - | - | - |
|
Manufacturer
FIGARO
|
NGM2611 | Module | MOS | Methane (CH4) | 300...10 000ppm | 5 000ppm | Voltage, Vout-Vref | - | - | 5V | 66 mA | 0...+40°C | 27x12,5x10mm | Connector | TGS2611 sensor | - | - | - |
|
Manufacturer
FIGARO
|
- | Sensor | Electrochemical | Oxygen (O2) | 0...30% | - | Voltage | 0,335mV/%, Typ. | ±1% FS, Typ. | - | - mA | -10...+50°C | D20,4x16,6mm | Pins for socket | Temperature compensation circuit included | - | - | - |
|
Manufacturer
FIGARO
|
- | Accessory | - | - | - | - | - | - | - | - | - mA | - | 235x180x210mm | - | Gas test box 5,4l | - | - | - |
|
Manufacturer
FIGARO
|
- | Sensor | MOS | Carbon monoxide (CO) | 30...1 000ppm | - | ΔR | 0,13-0,31 | - | - | - mA | -10...+50°C | D22,7x9,2mm | Solid legs | - | - | - | - |
|
Manufacturer
FIGARO
|
- | Sensor | Solid Electrolyte | Carbon dioxide (CO2) | 350...10 000ppm | - | Voltage | 44-72mV | - | - | - mA | -10...+50°C | D22,4x9,2mm | Solid legs | - | - | - | - |
|
Manufacturer
FIGARO
|
- | Sensor | Electrochemical | Carbon monoxide (CO) | 0...1 000ppm | - | Current | - | - | - | - mA | -10...+60°C | 28,5x20,9x15mm | - | - | - | - | - |
|
Manufacturer
FIGARO
|
- | Sensor | MOS | Hydrogen (H2) | 10...4 000ppm | - | ΔR | - | - | - | - mA | -10...+40°C | D23x19,5mm | Solid legs | - | - | - | - |
|
Manufacturer
FIGARO
|
- | Sensor | MOS | Hydrogen (H2), Carbon monoxide (CO) | 200...5 000ppm | - | ΔR | 0,4-0,63 | - | - | - mA | - | D25x17mm | Solid legs | - | - | - | - |
|
Manufacturer
FIGARO
|
- | Sensor | MOS | Ammonia (NH3) | 30...300ppm | - | ΔR | 0,55 ±0,15 in 1500ppm | - | - | - mA | -30...+50°C | D23x19,5mm | Solid legs | - | - | - | - |
