Imagine a situation, when you need to check or set a voltage of 3.3V or 5V usual at digital electronics (AD converters reference,…). Or to measure the end of recharging of Li-ion/ Li-Pol batteries at 4.20V when it really matters on every miliVolt. In these cases, with usual multimeters you´ll face one cardinal fact - regarding that the most of them has a max. display reading of 1999, you´ll measure in hardly the first quarter of a range, thus with a significantly lower resolution. For example instead of desired 4.001 V (3 decimal positions), you´ll only see 4.00V. Naturally, we don´t always need such a high resolution but many times an improvement of resolution in one magnitude can provide us a worth information about a real situation in a measured circuit. In these situations it often doesn´t matter on the absolute accuracy that much, but right on a resolution, especially when comparing voltages in two points, increase/ decrease...
From this point of view is the novelty in our stock UT139C an excellent device providing besides a high resolution (5999) also another features worth to notice, for example: TRUE RMS measurement in a range of 45Hz-1kHz (to 400 Hz with VFC filter activated), measuring of high-capacity capacitors up to 99.9 mF (99 999 uF), measuring of duty cycle in a range of 0.1% - 99.9% and other. Not quite common is also measuring of uA and mA even in AC range. Function Rel is useful even at measuring of small capacitors, where it´s able to eliminate “offset” caused by a capacitance of testing leads.
UT139C is also able to serve as a non-contact AC voltage tester (NCV), indicating in 4 steps a proximity of >100VAC voltage. . Indication is by a red LED in the upper part of display, by a display (-,--,---,----) and by a buzzer.
Further information will provide you the UT139C datasheet.
In case of interest, please contact us at info@soselectronic.com.
- modern multimeter with max. reading of 5999
- automatic/ manual range
- CATIII/ 600V
- TRUE RMS (45Hz-1kHz)
- capacity 9,99nF-99,9 mF
- frequency 10Hz-10MHz
- temperature -40 to 1000°C
- diode and continuity tester
- Data Hold and Rel function
- non-contact voltage detector (4 levels of indication)
- robust and ergonomic construction
- advantageous power supply by two AA cells
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
