A card is designed to meet stringent demands for a data reliability and a write protection. Simple locking of lock switch on a bottom side allows data to be read only, thus protected from an accidental deletion and/or tampering of confidential information.
APACER CF 5 and CF 5 Plus are compliant with a CFA 4.1 specification. Used SLC chip (single level chip) and an intelligent power failure recovery system contribute to a card reliability. To keep data correct, CFC 5 supports 24 bit hardware ECC function ( error checking and correction), advanced wear-leveling and block management, and S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology). Transfer mode is up to PIO-6, multi-word DMA-4 and Ultra DMA-5. They are available in a standard working temperatures range 0 to +70°C and also in extended range -40 to +85°C. Among outstanding features of cards CFC 5 belong also a high resistance to humidity, shocks and vibrations. All these advantages make memory cards APACER CFC 5 a CFC 5 Plus ideal for embedded devices in a medical, military and automotive segments, as well as there, where the highest level of reliability and data safety is required. Further information will provide you the Apacer CF5 datasheet. In case of interest about any CF5 series memory card, please contact us at info@soselectronic.com.
- industrial Compact Flash card CFA 4.1 compliant, SLC chip
- lock switch for a write protection
- data transfer up to PIO-6, Multi-Word DMA-4, Ultra DMA-5
- sequential read/ write - 40/30 MB/sec
- 24 bit ECC and Advanced wear-leveling and block management
- available in capacities 128 MB – 16 GB
- specified for temperatures 0 to +70°C and -40 to +85 °C
- standard 50-pin connector
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
