Notice
You are currently browsing the website for customers from Switzerland. We recommend switching to the United States version of the site, optimized for your region.
|
Manufacturer
4D SYSTEMS
|
128x128pix | RGB | 27x27mm | TTL | 45,5x36x13,7mm | 3,3V | GOLDELOX 4D-Labs | -35...+75°C | - | uOLED128 | - |
|
Manufacturer
4D SYSTEMS
|
160x128pix | RGB | 33,6x27mm | TTL | 52x36x15,5mm | 3,3V | GOLDELOX 4D-Labs | -35...+75°C | - | uOLED160 | - |
|
Manufacturer
4D SYSTEMS
|
96x64pix | RGB | 20x14mm | TTL | 32,7x23x12,5mm | 3,3V | GOLDELOX 4D-Labs | -35...+75°C | - | uOLED96 | - |
|
Manufacturer
4D SYSTEMS
|
128x128pix | RGB | 27x27mm | ISP, UART | 35,8x36x13,7mm | 5V | Goldelox | -35...+75°C | - | SK128 | - |
|
Manufacturer
4D SYSTEMS
|
128x128pix | RGB | 27x27mm | ISP, UART | 35,8x36x13,7mm | 5V | Goldelox | -35...+75°C | Arduino shield for display | SK128 | - |
|
Manufacturer
4D SYSTEMS
|
160x128pix | RGB | 33,6x27mm | ISP | 52x36x15,5mm | 5V | Goldelox | -30...+70°C | - | SK160 | - |
|
Manufacturer
4D SYSTEMS
|
160x128pix | RGB | 33,6x27mm | ISP | 52x36x15,5mm | 5V | Goldelox | -30...+70°C | Arduino shield for display | SK160 | - |
|
Manufacturer
4D SYSTEMS
|
96x64pix | RGB | 20x14mm | TTL | 32,7x23x12,5mm | 5V | GOLDELOX 4D-Labs | -35...+75°C | Starter kit | SK96 | - |
|
Manufacturer
4D SYSTEMS
|
96x64pix | RGB | 20,1x13,4mm | TTL | 32,7x23x12,5mm | 5V | GOLDELOX 4D-Labs | -35...+75°C | Arduino shield for display | SK96 | - |
|
Manufacturer
4D SYSTEMS
|
128x128pix | RGB | 27x27mm | TTL | 45,5x36x13,7mm | 5V | GOLDELOX 4D-Labs | -35...+75°C | Arduino shield for display | uOLED128 | - |
|
Manufacturer
4D SYSTEMS
|
128x128pix | RGB 65K | 27,0x27,0mm | GPIO, SPI, serial | 45,5x36,0x13,7mm | - | PIXXI 28 | -35...+75°C | Supply Voltage 4,0-5,5VDC | uOLED128 | - |
|
Manufacturer
4D SYSTEMS
|
160x128pix | RGB | 33,6x27mm | TTL | 52x36x15,5mm | 5V | GOLDELOX 4D-Labs | -35...+75°C | Arduino shield for display | uOLED160 | - |
|
Manufacturer
4D SYSTEMS
|
160x128pix | RGB 65K | 33,6x27,0mm | GPIO, SPI, serial | 52,1x36,0x13,8mm | - | PIXXI 28 | -35...+75°C | Supply Voltage 4,0-5,5VDC | uOLED160 | - |
|
Manufacturer
4D SYSTEMS
|
96x64pix | RGB | 20,1x13,4mm | TTL | 32,7x23x12,5mm | 5V | GOLDELOX 4D-Labs | -35...+75°C | Arduino shield for display | uOLED96 | - |
|
Manufacturer
4D SYSTEMS
|
96x64pix | RGB 65K | 20,1x13,4mm | GPIO, SPI, serial | 32,7x26,7x13,2mm | - | PIXXI 28 | -35...+75°C | Supply Voltage 4,0-5,5VDC | uOLED96 | - |
This type of display is used to show letters, numbers, symbols, and complex graphics. The display area of these screens is typically composed of a large number of pixels. The operation of the display requires control electronics, which, along with the display itself, forms the OLED module.
This is one of the most widely used type of displays that have found their application in various medical devices, mobile phones, interactive toys, and similar devices.
SOS electronic offers graphic OLED modules from brands like Display Visions, Bolymin, Winstar, 4D Systems, and others.
