FTDI’s CleO35 is simple to program, 3.5 inch 320x480 TFT display with resistive touch panel that allows the construction of human machine interfaces (HMIs) with much higher performance than conventional Arduino display shields are able to deliver.
NerO is dealing with the fundamental drawbacks of the widely-used Arduino UNO R3 – inefficient onboard linear voltage regulator.
FTDI.FT-X series USB to serial bridges can be still reasonable option even for today.
The Computer on Module (COM) integrates i.MX6 ARM® Cortex® A9 processor, DDR3 memory, Gigabit Ethernet and power management on compact PCB measuring 38x38mm only and simultaneously makes available all other processor interfaces on three 100-pins connectors.
Apacer Technology Inc., well known as manufacturer of industrial SSD solutions offers also consumer grade microSD memory cards. Such cards are perfectly suitable for devices like mobile phones, tablets and digital still cameras.
The FTDI FT260 implements entire USB protocol for human interface device (HID) class on the chip and provides USB 2.0 Full Speed (12Mbps) connectivity for broad range of peripherals communicates through I2C or UART.
±2% accuracy in a whole range - that´s just one of several improvements of the third generation of calibrated sensors from company Sensirion.
Industrial Apacer microSD memory card combine MLC flash with special firmware which significantly improves programming speed and number of programming/erasing cycles.
FT600/601 SuperSpeed USB 3.0 to 16/32 bit FIFO interface bridge offers an alternative to Ethernet for high-speed high-volume data transfers.
FT900 is 32bit RISC MCU developed for high speed, interface bridging tasks.
Industrial memory cards Apacer comprise hide in themselves much more than usual cards.
