Electronic components
Argentina
€ (EUR)
Prices without VAT
TE Connectivity has brought the MS5840-02BA to the market. It is a gel-filled digital pressure and temperature sensor that is ideal for small mobile devices and smart electronics due to its ultra-compact size. (2,5-minute reading)
Check the interior’s concentration of CO2 with the simple reference design, Sensirion SCD4x CO2 Gadget. After measuring the increased CO2 concentration, a light signal on the product will alert you that it is time to ventilate.
Linear voltage regulators still have a place in modern electronics. They are easy to use and require only two additional components, an input and an output capacitor.
You can keep the concentration of formaldehyde at a safe level by frequent ventilation. But how to ventilate effectively? With the SFA30 Sensirion, it's a piece of cake.
The total volatile organic compounds concentration in ppb cannot be measured by using a single MOS sensor, but the VOC index can. Try it out with the SGP40 sensor in the SEK-SVM40 Sensirion development kit. We have it in our stock.
Apacer SLC-liteX technology combines Xioxia industrial 3D NAND TLC Flash chips and firmware that programs only one of the three bits. The results are outstanding. The SLC-liteX CH110 8GB memory card is our favourite.
Sensirion sensors SCD40 and SCD41 broke the size barrier and are the smallest CO2 sensors currently available. They measure only 10x10x7 mm, which is 10 times less than other CO2 sensors.
Sensirion sensor SHT40 is the first type of the 4th generation of humidity and temperature sensors for mobile and battery-driven applications. It builds on a completely new chip offering reduced current consumption and improved accuracy.
By using several of the same sensors, we can increase accuracy and minimise error in the measuring. By continuously measuring the temperature and relative humidity in various environments for almost a year, we compared the measurements of several Sensirion SHT31 SMART GADGET sensors with other temperature sensors. See how the measurement results turned out.
Sensirion’s SHT3xA sensor is today’s industry standard for humidity and temperature sensing in automotive applications. Its design and reliability is specifically optimized to meet the high quality standards of the automotive industry.
What parameters should you consider when choosing a reliable storage for industrial embedded devices? And which powerful embedded system storage is our No.1 choice? Find all the answers in the article.
With ControlCenter or SensorViewer software, and Sensirion evaluation kits, you can start the development with mass flow meters for gases and liquid flow meters straight away.
