Elektronische Bauteile
Österreich
€ (EUR)
Preise ohne MwSt.
|
Hersteller
FTDI
|
FT3xx | USB Bridge, Android Open Accessory Mode | USB 2.0 Host 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART, GPIO x7, I2C Master, SPI Master, SPI Slave | - | 3...3,6 V | SMD | 32-LQFP | MSL 3 | - |
|
Hersteller
FTDI
|
FT3xx | USB Bridge, Android Open Accessory Mode | USB 2.0 Host 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART, GPIO x7, I2C Master, SPI Master, SPI Slave | - | 3...3,6 V | SMD | 32-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT3xx | USB Bridge, Android Open Accessory Mode | USB 2.0 Host 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART, GPIO x7, I2C Master, SPI Master, SPI Slave | - | 3...3,6 V | SMD | 32-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT3xx | USB Bridge, Android Open Accessory Mode | USB 2.0 Host 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART | - | 3...3,6 V | SMD | 32-LQFP | MSL 3 | - |
|
Hersteller
FTDI
|
FT3xx | USB Bridge, Android Open Accessory Mode | USB 2.0 Host 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART | - | 3...3,6 V | SMD | 32-LQFP | MSL 3 | - |
|
Hersteller
FTDI
|
FT3xx | USB Bridge, Android Open Accessory Mode | USB 2.0 Host 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART | - | 3...3,6 V | SMD | 32-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT3xx | USB Bridge, Android Open Accessory Mode | USB 2.0 Host 12 Mbit/s | 232 UART (RTS, CTS) / 422 UART / 485 UART | - | 3...3,6 V | SMD | 32-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT4222 | USB Bridge | USB 2.0 Device 480 Mbit/s | I2C Master, I2C Slave, SPI / Dual SPI / Quad SPI Master, SPI Slave | 12 Configurable GPIO, 4 Slave Select, 2 Config Pins, Battery Charger Detection | 3...3,6 V, 4,5...5,5 V | SMD | 32-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT4222 | USB Bridge | USB 2.0 Device 480 Mbit/s | I2C Master, I2C Slave, SPI / Dual SPI / Quad SPI Master, SPI Slave | 12 Configurable GPIO, 4 Slave Select, 2 Config Pins, Battery Charger Detection | 3...3,6 V, 4,5...5,5 V | SMD | 32-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT4232 | USB Bridge | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x4, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 56-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT4232 | n/a | n/a | n/a | n/a | n/a | SMd | 64-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT4232HPQ | USB Bridge with Type-C/PD3.0 Controller, Single PD Port | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x4, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 68-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT4232HPQ | USB Bridge with Type-C/PD3.0 Controller, Single PD Port | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x4, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 68-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT4232 | USB Bridge | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x4, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 64-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT4232 | USB Bridge | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x4, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 64-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT4233HPQ | USB Bridge with Type-C/PD3.0 Controller, Dual PD Port | USB 2.0 Device 480 Mbit/s | 232 UART (Full) / 422 UART / 485 UART x2, Async or Sync Bit Bang x4, I2C Master x2, JTAG x2, SPI Master x2 | 8 configurable GPIO, Interface for Microwire EEPROM | 3...3,6 V | SMD | 76-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
FT6xx | USB Bridge | USB 3.0 5 Gbit/s | FIFO 16-bit | n/a | 3...3,6 V | SMD | 76-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
VNC1 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (Full) / 422 UART / 485 UART, FIFO, SPI Slave | 28 GPIO | 3...3,6 V | SMD | 48-LQFP | MSL 3 | - |
|
Hersteller
FTDI
|
VNC2 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (RTS, CTS) / 422 UART / 485 UART, SPI Slave | 3 GPIO | 3...3,6 V | SMD | 32-LQFP | MSL 3 | - |
|
Hersteller
FTDI
|
VNC2 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (RTS, CTS) / 422 UART / 485 UART, SPI Slave | 3 GPIO | 3...3,6 V | SMD | 32-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
VNC2 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (RTS, CTS) / 422 UART / 485 UART, SPI Slave | 3 GPIO | 3...3,6 V | SMD | 32-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
VNC2 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (Full)c / 422 UART / 485 UART, SPI Master, SPI Slave | 7 GPIO, 3 PWM | 3...3,6 V | SMD | 48-LQFP | MSL 3 | - |
|
Hersteller
FTDI
|
VNC2 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (Full)c / 422 UART / 485 UART, SPI Master, SPI Slave | 7 GPIO, 3 PWM | 3...3,6 V | SMD | 48-QFN | MSL 3 | - |
|
Hersteller
FTDI
|
VNC2 | Programmable USB Controller | USB 2.0 Host/Device 12 Mbit/s x2 | 232 UART (Full)c / 422 UART / 485 UART, SPI Master, SPI Slave | 7 GPIO, 3 PWM | 3...3,6 V | SMD | 48-QFN | MSL 3 | - |
|
Hersteller
WIZNET
|
W51xx | n/a | n/a | n/a | n/a | n/a | SMD | LQFP48 | n/a | - |
